INSTALLATION GUIDE

Installation Guide

Follow these step-by-step instructions to install your seat covers in 30-40 minutes.

  • Time 30-40 min per row
  • Difficulty Easy
  • Tools 0 special tools

WATCH IT DONE

Video Walkthrough

Watch on YouTube

WHAT YOU NEED

Tools & Materials

  • Soft clothFor wiping seats clean
  • Plastic trim toolOptional, helps tuck edges
  • VacuumPre-cleaning seats
  • 30 minutesPer row of seats

STEP BY STEP

Installation Steps

  1. STEP 1
    Step 1

    Prepare your seats

    Vacuum thoroughly and wipe down with a soft damp cloth. Make sure seats are dry before installing covers.

  2. STEP 2
    Step 2

    Remove headrests

    Press the release button at the base of each headrest and pull straight up to remove.

  3. STEP 3
    Step 3

    Slip on the backrest cover

    Pull the backrest cover down from the top, aligning the airbag passthrough with the side seam.

    ⚠ Never block the airbag seam — line up the marked tag with the side stitch.

  4. STEP 4
    Step 4

    Fit the seat base

    Tuck the cover into the seam between backrest and base. Loop straps under the seat and clip together.

  5. STEP 5
    Step 5

    Reattach headrests

    Slide headrest covers on, then re-insert headrests into the seat. Adjust to comfortable height.

PRO TIPS

Tips from Our Install Team

  • Warm covers before fitting

    Leave covers in the sun or a warm room for 30 min — they stretch into place easier.

  • Work top-down

    Always start at the top of the seat and work toward the base — gravity is your friend.

  • Don't force seams

    If a seam doesn't line up, re-check orientation. Forcing it can stretch the fabric permanently.

Need installation help?

Our support team is happy to walk you through any step — call, email, or chat.

Contact Support →